Service Pricing

Zinc Coating

Zinc Barrel plating—-

All Hardware including but not limited to (Bolts, Nuts, Washers, Screws, etc) is $50.00 Per Pound from start to finish. This includes Vapor honing, acid etching, plating, and the chromate color of your choice.

Color choices that we currently offer are - Hexavalent Yellow (Gold), Trivalent Blue (Silver), Hexavalent Black (slight iridescence)

Usually, the parts must be seen and inspected to determine if plating is possible. Bolts with Extreme pitting and stripped threads will not be plated unless told to do so by the client. Rust will be noted and can affect the price if it is serious.

Rack plating—-

Larger items such as fuel rails, hardlines, pulleys, brackets, etc, are priced based on the size and complexity of the item. We can give you a rough ballpark quote from pictures but final pricing is determined after the part has been measured and quality checked. Rust will be noted and can affect the price if it is serious.

Turnaround time is usually between 3-4 weeks. We will not let any parts leave without them being perfect and have received the go-ahead from the client!

Please contact us through Instagram private messages to book an appointment today!

Vapor Honing

Vapor honing—-

Vapor honing is priced shop rate of $75.00 Per Hour
30 Minute Minimum

Anything aluminum can be vapor honed

All parts must be fully disassembled whether it be Engine Heads or intake manifolds. Addition costs will be further discussed if disassembly is required.

Steel can also be vapor honed as we do it with hardware but it will be fully dried and bare metal. This option is good if you would like to strip parts of paint, dirt, oil, etc. It will leave a nice smooth finish and allow a great starting point for powder coat, polishing, or painting. Flash rusting is possible and must be accepted as a possibility when giving us steel parts to vapor blast. We will dry them as best as possible but light sanding might be required once you receive the parts.

We can also Vapor Hone Plastic and Rubber under certain circumstances. Vapor honing will restore the condition of rubber to brand new as it rehydrates the rubber and skims the first layer of old hard rubber from oxidation. Same for plastic in certain applications! Check our Gallery for more pictures.

Please contact us through Instagram private message to book an appointment today!

Complete part restorations

Complete part restorations must be gone over fully with the client to make sure it’s possible we can complete the project at the highest quality! For instance, brake calipers must be aluminum and must be shipped to us with all new gaskets, seals, and the necessary parts to fully restore the part and make it brand new again. We will not be responsible for any incomplete part assemblies if the client does not send us all the required parts to complete such a project.

Another example is any other part assemblies must be able to fully purchase all brand new parts. Older model cars where parts are discontinued or not available through a dealer will not be accepted. You will have to disassemble and reassemble the parts after we complete our finishing services.

If we do not feel comfortable accepting the part for a full restoration please respect our decision as we have had extreme cases where the part was ruined from unforeseen damage and or parts were taken apart that were not able to be replaced because of supply issues or old age!

Thank you!

Please contact us through Instagram private messages to book an appointment today!